Author Topic: [FF7PC] [7H] Enhanced Stock UI (2.0) (Read 173069 times)

Chrysalis · « **Reply #150 on:** 2020-05-03 21:52:03 »

Fireflew If you want the original menu textures, spacing etc. but with full screen battle rendering, The FFNX driver by trueodin now has that as a built in feature.

Information here, it has a flag to move the battle UI to bottom.

https://github.com/julianxhokaxhiu/FFNx#how-to-install

Fireflew · « **Reply #151 on:** 2020-05-05 01:15:44 »

Thanks Chrysalis.

Tried it out but couldn't get it to start in fullscreen despite setting it as fullscreen in the config.

Also couldn't get it to work with 7th Heaven. I was probably doing something wrong though.

CrichtonKicks · « **Reply #152 on:** 2020-05-14 00:32:02 »

I've had a couple of occasions where the text boxes disappear immediately as soon as they appear but the game is still waiting for a control prompt for me to proceed. The box pops up so fast that it can't be read. It happened in the mansion basemen flashback at Nibelheim and happened during the train chase in Corel. Disabling the mod fixed the issue.

Chrysalis · « **Reply #153 on:** 2020-05-14 01:44:31 »

Re download it from the catalog, I pushed an update which should stop that.

I didnt announce or get the catalog version updated yet.

If it does still happen after you re download please let me know where it occurred

CrichtonKicks · « **Reply #154 on:** 2020-05-14 01:56:42 »

Thanks! That seemed to fix it.

CrichtonKicks · « **Reply #155 on:** 2020-05-14 02:12:12 »

Spoke to soon- while the re-download fixed the issue at Mt Nibel/Corel I just had it happen when speaking to the two NPCs standing outside the clinic at Mideel. '

This is using ESUI -rel 2, dated 5/12 downloaded from the catalog.

Chrysalis · « **Reply #156 on:** 2020-05-14 02:55:15 »

Download again, I just put the old parameters back in from last week, the changes I did for NT mansion have had too many unintended side affects so those have been rolled back.

I will version bump this tomorrow so everyone gets an new version in 7h.

SeveronSylvanas · « **Reply #157 on:** 2020-05-14 03:28:03 »

Hey there.

New Threat recently made it compatible to show controller icons with ESUI which works with the 2.27 version. However if I use the FF7 Remake ESUI it doesn't show the icons. Not sure if Im missing something or if the mod doesn't support it yet?

Chrysalis · « **Reply #158 on:** 2020-05-14 04:26:50 »

just need to wait on that one, fewtch is working on it.

hatori · « **Reply #159 on:** 2020-05-15 20:27:00 »

Having a problem when enabling the enhanced stock option in the mod, i can use every other option however i like, but once this option is turned on, i get a crash when loading the game due to an access violation. i had the same crash when using the same option in the user interface mod. both ff7.exe (which is the original patched exe from the 1998 version of the game) and 7th heaven programs are set to run as administrator and made sure i had anti virus turned off while testing the issue. this was also the only mod running when i started to test to see if another mod caused the crash.

Chrysalis · « **Reply #160 on:** 2020-05-17 20:49:49 »

This is due to the hext modification of the code, in your OS you need to disable DEP protection for ff7.exe.

By default this is "not" enabled, so you or a program has changed it on your system.

darxide · « **Reply #161 on:** 2020-05-29 03:15:23 »

Got a bug here. It's pretty self explanatory: https://www.youtube.com/watch?v=8hKJ_nmvq08

tl;dr: Using thinner or thinnest UI bars causes some dialog boxes to vanish. Setting it to "No Change" has no such bug.

Also, the download link in the first post here goes to 404.

Chrysalis · « **Reply #162 on:** 2020-05-29 04:33:20 »

You using build 2.27 which was broken, please update to the latest in MOTR catalog, I will fix the link in the first post.

L@Zar0 · « **Reply #163 on:** 2020-08-09 10:11:20 »

Hi Chrysalis,

I'm doing the HD version of the spanish retranslation and wanted to use your amazing mod ESUI. I'm using Enhanced Stock UI 2.32 version. I must touch some things, but it shows the very high quality of your mod.

Although I can found a lot of byte offsets, there is one concrete that I can not find, this image will explain very well:

As you can see "Golpe de duende" is outside boundaries. But I have not found any info about the bytes x/y-axis or width/height for this subwindow or the eskill text inside.

Could you offer any help? I think that with one offset I'll do, the rest must be near it.

Thanks a lot for this great mod!!

demanson · « **Reply #164 on:** 2020-08-28 01:30:18 »

Is it possible to get Break Hp and damage limit added?

Chrysalis · « **Reply #165 on:** 2020-08-28 09:38:28 »

thats not just a UI change, but I will work with EQ2Alyza to get that added in next qhimm catalog update.

Harleyquinn · « **Reply #166 on:** 2020-09-15 02:45:40 »

I don't know if anyone has already reported this, but when using the FF7 Remake ESUI theme the icons of the PSX and XBOX controllers are swapped.

When I select PSX icons, the XBOX icons appear ingame and vice versa. This only occurs in the FF7 Remake theme, in the Enhanced Stock UI it works as it should.

uxu888 · « **Reply #167 on:** 2020-09-15 20:45:51 »

Hallo L@Zar0

could you write to me here in the forum or leave a message (email address) I would urgently need your help with a translation project

(unfortunately I cannot contact you by message here)

thanks

demanson · « **Reply #168 on:** 2020-09-20 15:56:29 »

Quote from: Chrysalis on 2020-08-28 09:38:28

thats not just a UI change, but I will work with EQ2Alyza to get that added in next qhimm catalog update.

Thank you.

Hypnotic Mind · « **Reply #169 on:** 2020-11-18 02:06:31 »

Hello,

I am currently having trouble getting this mod to work with 7H. I have DL'ed and installed it properly, even with only this and the other ESUI required mod and I cannot get the remake theme to show at all. Am I missing something or doing something wrong? I've also tried to start 7H with only this mod and still nothing. Please help. Thanks.

Hypnotic Mind · « **Reply #170 on:** 2020-11-21 12:20:21 »

EDIT

Nevermind. I got it to work now.

Chrysalis · « **Reply #171 on:** 2020-12-03 00:19:34 »

I have added a donation link, if anyone wishes to.

Thank you to all who have chosen to use this mod.

Xathyr · « **Reply #172 on:** 2020-12-13 09:26:41 »

Hi, thank you for the hard work! Although i have a doubt, I'm using ESUI controller addon from the 7th heaven catalog, but when using it it enables by default semi transparent/translucid field chat boxes with no way to turn it off, is there any way to make chat boxes opaques again without turning the mod off?

Also, just noticed there's a bug where this happens:

Once this dialogue box is open the game basically softlocks since you can't move the cursor around the chat options and there's no way to close the dialogue box.

JorgeOm · « **Reply #173 on:** 2020-12-19 08:32:48 »

Is it possible to get the PSX button prompts without changing the rest of the UI?

Chrysalis · « **Reply #174 on:** 2020-12-30 17:29:30 »

Quote from: Xathyr on 2020-12-13 09:26:41

Hi, thank you for the hard work! Although i have a doubt, I'm using ESUI controller addon from the 7th heaven catalog, but when using it it enables by default semi transparent/translucid field chat boxes with no way to turn it off, is there any way to make chat boxes opaques again without turning the mod off?

Also, just noticed there's a bug where this happens:

Once this dialogue box is open the game basically softlocks since you can't move the cursor around the chat options and there's no way to close the dialogue box.

Hi, can you please check if you have the latest version of the controller addon, as that was a previous bug which got fixed in the latest version, if you are unsure of the version please post a screenshot of your 7th heaven window showing your mod list, thanks.

Also the option for semi transparent field dialog boxes I tied into the field dialog style (ESUI option), I can add an option separately if you prefer solid color field boxes.

Originally it was a driver option, but since it was removed as a driver setting, to try and avoid over bloating the options, I just tied it to the field dialog changes as no one had ever requested it to be off before.