Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - e2zippo

Pages: [1] 2 3
1
Is there a discord of any other place where we can follow progress? :)

2
nah it works again, its built-in to moguri now

Really? It says on the site that it's currently not working.

Scaled Battle UI: "SX-looking battle interface | Needs an update from TehMighty

Seems it doesn't work for some people here as well.

https://www.nexusmods.com/finalfantasy9/mods/11?tab=posts

3
Any status update on the scaled battle ui? Steam update broke it right?


4
I use it all the time.
see here https://prnt.sc/u37q5o


Install reshade at the x86 or x64 folder depending your system architecture. choose opengl instead of vulkan or 3d3.

I had picked the wrong .exe,  x86 instead of x64. But I'm using D3D9, and now it's working, thanks!

5
Hey! I can't seem to get Reshade to work with Moguri 8.2, any ideas?


6
Yeah, only Moguri. I'll try another reinstall.

7
Awesome update snouz! However I  don't seem to doing any damage when entering a fight. I started a completely new save and when fighting Baku in the beginning I'm not doing any damage, neither is he, so the fight never ends.

Any ideas?

8
I can't for the life of me get Moguri to work with the scaled battle UI, not matter how many times I try, something always get's messed up.

Can anyone provide a step by step guide from a clean install to get it working?  :?

9
It's better to start over, there was a lot of improvement in save handling in the last year on Memoria. You're really at the beginning of the game though.

Yeah, I know, I'll start over then.
You think there will be any more changes to save files in the near future?
If so I might hold off a while longer before diving in.

Thanks!

10
Had someone report the same bug recently, but they used a save from before installing 8.0

Is this a new game or an old save from 7.0.1?
It's an old save.
Do I need to start over or can I edit it?

Skickat från min SM-G973F via Tapatalk

11

You needed to first delete the Moguri Mod folder which is not in FFIX folder.

I installed to a completely new Moguri Mod folder. Last install I had everything in "Steam\steamapps\common\FINAL FANTASY IX"


12
Just deleted my FFIX completely and started over, hoping to get the scaled battle ui working, but I'm seeing issues after installing the official 8.0.1 version.

So I reinstalled FFIX from Steam completely first, then ran Moguri installer and booted the game.

Something is messing up Zidanes text boxes though, I can't remember him saying this :)




Any ideas what's up?

13
I'm sorry if this is off topic but what is the best way to launch the game, any way to bypass the launcher?

Also, launcher seems to launch twice, adding a parameter from steam?

And big congrats on the official release, great stuff!




14
The d-pad issue (which I've seen people comment may also affect shoulder buttons?) went away for me, when I configured the game's properties in Steam, disabling the Steam Overlay and forcing Per-Game Input Settings on. I also configured the input to rotate the overworld camera with the right stick, but that's just a personal preference.

That did it, thanks a lot!

snouz: Marker when saving is overlapping the text, bug or intended? :)

https://imgur.com/a/3dYcRyn

15
D-pad problem on github:
https://github.com/Albeoris/Memoria/issues/110
If you have more info to contribute, go ahead. I could not reproduce the problem on both xbox controllers. The nexus ticket talks about a PS4 controller, is this your case?

@Doom Oyster about the pause cooldown, did you install JUST the beta? with the included latest memoria? The double pause issue is something I experienced a lot with the base game and should be fixed by the latest memoria version.

BTW about controller layout, does it display playstation icons when playing with a ps controller? What does it show?
Also, when talking about controller, please tell your model : )

Other issues noted

I have a 8bitdo SN30 Pro +, it's listed as a Xinput device, so it's basically an Xbox Controller.
It's working everywhere else.

Anything I can try?

Edit: As stated by another user,  by going in to Steam Big Picture mode > Controller and disabling Xbox Configuration Support the dpad starts working. However it's not a very good workaround since I use that setting in other steam games.
I updated my post on the github issue as well.

16
Awesome update to say the least!

I can't seem to disable analog control though.
I've turned it off in memoria.ini

Code: [Select]
[AnalogControl]
Enabled = 0
StickThreshold = 10 ; 0...100
MinimumSpeed = 5

And my dpad isn't working?

17
I guess this is good news snouz? :) what does that actually mean for the graphics?  :o

18
.
I didn't write that he MUST but that he CAN. It is a big difference. It was not an order and I don't think it was rude. It was my opinion that it would not be against anything if he changed that. I wrote it because one could think that it would not be legit to change it since the purpose of this mod is only enhancing graphics and it shouldn't change anything.

I don't have time and mood  to talk to you, sorry.  This is the last post I wrote to you. BTW Thanks for discouraging people to help with developing this great mod.

Maybe quote my whole post next time instead of paraphrasing. And when did I discourage people from helping out? I literately wrote that it's great that people help out with bug reports.

Enough of that, and back on topic  :)

19
It's not like that. This is a beta test and there is no room for formalities. I believe Snouz understand that. It is in every beta tests like that. It's better to dedicate the time playing nad looking for bugs than to dedicate it to writing tons of formal text.

A lot of people wanted Snout released a beta version of this mod but most of them are just playing and not paying attention to the possible bugs. It is not very enjoyable to play like beta tester and you should be like for people like me. I do it for everyone. So please keep quite.

There's always room for some courtesy! Even though it's considered a beta test snouz have no obligations whatsoever! It's great that people make bug reports as snouz wanted, but don't come stamping in here making demands.

Thank you once again snouz for your impeccable attention to details!

20
It should still be compatible.
What you need to do:
-Install normal moguri
-Only replace StreamingAssets files in the moguri install folder (program_files\Moguri mod\)
-install the ui mod.

I was unaware that there was a recent update to make it work with memoria. Does this mod work out of the box or do you need to tweak things? I've sent a steam friend request to discuss.

I tried installing it but I messed up the options somehow, making everything look really weird! It would be so awesome to get the PSX UI in conjunction with your rework of Moguri!

Hopefully he'll respond and you can work something out to get this working! It's a good time to be a FFIX fan!   :-D

21
Would this mod be compatible with moguri rework snouz?

https://www.nexusmods.com/finalfantasy9/mods/11?tab=files

There's a checkbox when installing it asking if your're using moguri.
Are you using the same file structure as moguri?

Thanks!

22
Just got i working, and it looks fabulous, many thanks for your work in this snouz!

Quick question though, and sorry for posting OT, but is it a known issue in FFIX steam release that the music just cuts off when changing, instead of fading like in the PSX version?
And after a quick google search it seems that they butchered the sound effects as well, are there any fixes to these issues?

Cheers!

23
Oo, can't wait to try this, but I'm confused, do I need to install the "old" moguri mod first to get this working?

Thanks snouz!

Skickat från min SM-G973F via Tapatalk


24
I've got 55 screenshots of bugs left to treat, then I'll package a beta!
You're a machine snouz!

Skickat från min SM-G973F via Tapatalk


25
@Agravaile
Never seen this stuck, that system do you use (windows type...)
The ui upscale is for vanilla UI, if you use cutom ui or reunion ui, you'll have bugs.
Since v4 iro only minor fix, if you don't use it with ffnx to take adventage of dds... no need for update.

Cool stuff satsuki with the installer!

So which options should I use/not use when using Reunion R06d to avoid any issues?

Thanks!

Pages: [1] 2 3