Author Topic: .p, Battle Files 'n Milkshape 3D (Read 75564 times)

Anonymous · « **Reply #25 on:** 2001-05-26 20:53:00 »

hey alhexx, are the battle models for people full hodies or just peices?

Anonymous · « **Reply #26 on:** 2001-05-27 03:37:00 »

sweet! check out cwap. its a wolf head.

Anonymous · « **Reply #27 on:** 2001-05-27 03:52:00 »

a lot of the si**s are swords.
i cant find any of the people tho! AAAARRRGGGGHHHHH!!!!!

Alhexx · « **Reply #28 on:** 2001-05-27 16:23:00 »

Hey, Dark, if u'r searchin' 4 the main characters (tifa, cloud,...), look at these files:
ru**, rx**, rv**, rw** and so on...

- Alhexx

halkun · « **Reply #29 on:** 2001-05-27 17:09:00 »

Wow, we being userped by the newbies. You guys are making me feel bad for not digging around the engine like I used too. I've been meaning to figure out the bytecode in the field files, but have benn busy...yea...busy...

Anonymous · « **Reply #30 on:** 2001-05-27 22:03:00 »

k thanks

dammit someone registered my name........

Anonymous · « **Reply #31 on:** 2001-05-27 22:08:00 »

whoohoo! ultima025!

Alhexx · « **Reply #32 on:** 2001-05-27 22:09:00 »

halkun:

dark(ness): It wasn't me...Sorry...

To All: I've uploaded a new screenshot (of snow) and version 0.25 of 'Ultima'. I've fixed some bugs, but it still can't convert raw to .p files (I'm workin' on it, but it doesn't work (I don't understand why...))

- Alhexx

- edit -
Congratulations, Dark(ness), u were able to fin ultima025 in the time between uploading it and writing this post...

[This message has been edited by Alhexx (edited May 27, 2001).]

Anonymous · « **Reply #33 on:** 2001-05-27 22:12:00 »

but the raw-->p option doesnt work. DoH!!!

Alhexx · « **Reply #34 on:** 2001-05-27 22:15:00 »

Damn, Dark, u'r a real fast guy!

p-->raw: That exactly what i've written in my post!

- Alhexx

ficedula · « **Reply #35 on:** 2001-05-28 03:44:00 »

I've updated LGP Tools (again ... damn bugs!). Don't know how most of you are getting your .P files into Ultima, but anyway, since I was updating anyhow, I added a feature that might help you...

Basically, if you're previewing a HRC skeleton in LGP Tools, then right click and one option is "Export Skeleton". This'll extract all the .P files that skeleton uses into a folder by themselves, ready for you to point Ultima at and do "Convert folder".

Not sure how much help it'll be but I thought it'd make getting the files ready for Ultima to convert easier.

Alhexx: I'll get Ultima 0.25 now. Anything interesting?

Oh, and d'you mind if I add your FF7 page to my webpage Links section? Didn't think you would, but I wasn't sure how permanent that page is.

[This message has been edited by ficedula (edited May 27, 2001).]

Anonymous · « **Reply #36 on:** 2001-05-28 16:39:00 »

its forbidden, fice

tulkk · « **Reply #37 on:** 2001-05-28 05:01:00 »

yeah fice old friend... i can't dl it either :/

Anonymous · « **Reply #38 on:** 2001-05-28 05:21:00 »

do you guys know where the summon models are?
i was assuming they were in magic.lgp, but i cant find them.

Alhexx · « **Reply #39 on:** 2001-05-28 17:03:00 »

fice: Of course, I don't mind...I'm very proud that I made it up to your links page...

to Ultima025: There's nothing really new, I've fixed some bugs with the convert function and I've tried to convert raw back to .p, but this f**kin' Ultima doesn't want to write the coords of the vertexes into the .p file correct, but I don't understand why.?.but I'm still workin' on it...

LGP Tools Update: Sounds interesting...I'm going to download it now...

- Alhexx

- edit -
Hey fice, I can't download it, too. The Server wants username and a password...and because of this, he puts out : 403 - Access Forbidden (Hum, but I wonder why I can download lgptools 1.31

[This message has been edited by Alhexx (edited May 28, 2001).]

ficedula · « **Reply #40 on:** 2001-05-28 18:24:00 »

Damn. Sorry, set the permissions wrong (ie. forget to set them at all); fixed now.

tulkk · « **Reply #41 on:** 2001-05-28 21:29:00 »

Hey Alhexx.. I tested your proggie, nice work man

though i have a question.. Is it possible to import the whole model into 3dmilkshape or must I import piece by piece and then put 'em together manulaly in 3dmilk? If you haven't implanted that option yet (import a whole fieldmodel), it would be ultra cool if ya would look into that before the next release if it's not to hard...

keep up the good work dudes!

Alhexx · « **Reply #42 on:** 2001-05-29 00:21:00 »

tulkk: I've thougth about this option, too, but I haven't been able to programm it ('till now). First, I've got to figure out, how the pieces are put together. But I think, that I'll find it out some day. At the moment I'm workin' on this motherf

:xkin' raw-to.p converter (which still doesn't want to work!!! (and I still have no idea why...))

- Alhexx

P.S. YEEEAAHHH! I made it up to Ficedula's Link Page (I have never thought that this will happen so far ( I'm so happy ))

halkun · « **Reply #43 on:** 2001-05-29 08:23:00 »

positions are located in the .a files We *really* need to start with those...

Alhexx · « **Reply #44 on:** 2001-05-31 00:57:00 »

Hey, guys, bad news...
I can't get this raw-to-.p converter running...I just don't understand why it doesn't want to work

So I've decided to upload the source to see if someone can help me...it's written in Visual Basic 6. So if u can program in VB, take a look at this and tell me, if u know what I've done wrong...
http://alhexx.tripod.com/apps/ff/raw_to_p.zip" TARGET=_blank>http://alhexx.tripod.com/apps/ff/raw_to_p.zip

Please Help me...

- Alhexx

Anonymous · « **Reply #45 on:** 2001-05-31 03:00:00 »

cant download.......

Anonymous · « **Reply #46 on:** 2001-05-31 03:03:00 »

al......is that it. are there modules or anything that go with it? filterindex doesnt seem to be a valid command.

Anonymous · « **Reply #47 on:** 2001-05-31 03:07:00 »

i get the stranges feeling cd1 isnt supposed to be a picture box, but thats what it appears to be

Anonymous · « **Reply #48 on:** 2001-05-31 03:13:00 »

oh. lol. i got it.

Anonymous · « **Reply #49 on:** 2001-05-31 03:23:00 »

ok, al i spend some time looking at it, and the main problem is that you have the variables mixed up. Like this:
Y -> Z
X -> Y

and the outputed x variable is screwed up. ill look into it.

Author Topic: .p, Battle Files 'n Milkshape 3D (Read 75564 times)

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous

Anonymous