Author Topic: my first successful model conversion!  (Read 67063 times)

Borde

  • *
  • Posts: 891
    • View Profile
Re: my first successful model conversion!
« Reply #100 on: 2009-07-28 23:48:05 »
Of course. I just joined both model with PCreator though...

polaris_027

  • Guest
Re: my first successful model conversion!
« Reply #101 on: 2009-07-29 01:26:22 »
hey thanks borde! im happy about the model but i guess you forgot to flip the uv in pcreator of the hair part as you can see here..or maybe you did but youdidnt include his tex files in the link you provided..


Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #102 on: 2009-08-09 14:30:04 »
ANg galing mo pla pre!!!...Hanep!!!.At taga Tuguegarao pa ha...Sana matuto rin ako nyan...Sa ngayon sawsaw lang ako sa Forum na to..hanggang install at kabit ng mga mods lang kaya kong gawin....

Kung Okay lang pa PM sa kin mga mods na ginawa nyo na..PLease!! Kahit yung Field models lang..... Maawa na kyo!!!!





polaris_027

  • Guest
Re: my first successful model conversion!
« Reply #103 on: 2009-08-09 14:31:52 »
haha check ur PM..

Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #104 on: 2009-08-09 14:40:10 »
Thanks pol!!! Whhooppeee!!!....Sarap maging Pinoy...Buti na lng at pinoy ang mga gumawa ng MOD na to..hehehe


Isang request na lng alam ko may pag ka bopols to no...pero....Paano maglagay ng Avatar o pic sa Profile ko dito?...hehehe

Kung oks lang...Pero kung gusto mo ako na lang maghanp..kakahiya nmn...hmmm...hehehe

polaris_027

  • Guest
Re: my first successful model conversion!
« Reply #105 on: 2009-08-09 14:47:03 »
punta ka lang sa profile mo tas hanapin mo dun hehehe

death_gigas

  • *
  • Posts: 70
    • View Profile
Re: my first successful model conversion!
« Reply #106 on: 2009-09-30 05:30:34 »
pinoy to,,,, tanung ko lang kung meron ka bang mod na ang mga gf ay magaganda na?....pnge naman

Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #107 on: 2009-09-30 09:01:04 »
punta ka lang sa profile mo tas hanapin mo dun hehehe

Nakalimutan kong balikan to! hehehe..Nag reply ka pla!..thanks ulit! Uy Pol may model ka ba ni Vincent nung katulad sa JKNights?  Baka meron ka? pa send namn sa PM..

Evan Lee

  • *
  • Posts: 96
  • "I don't kill I eliminate"
    • View Profile
Re: my first successful model conversion!
« Reply #108 on: 2009-09-30 11:15:52 »
dude i could you please upload that vincent for me?

death_gigas

  • *
  • Posts: 70
    • View Profile
Re: my first successful model conversion!
« Reply #109 on: 2009-09-30 15:50:38 »
tol gnagamet ko na ung mod mo kaso wla ka bang model nung AC crazy motorcycle dun hindi kz nagbago ung sken eh

posh927

  • *
  • Posts: 10
    • View Profile
Re: my first successful model conversion!
« Reply #110 on: 2009-09-30 16:07:09 »
wow pretty good models!

Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #111 on: 2009-10-01 05:39:58 »
tol gnagamet ko na ung mod mo kaso wla ka bang model nung AC crazy motorcycle dun hindi kz nagbago ung sken eh

Pastilan dude....ayos yun yung chocobo ang magbabago dun...kaya lang kilos Chcobo yunf Fenrir mod na yun..kaya try mo lang ulit...

Evan Lee

  • *
  • Posts: 96
  • "I don't kill I eliminate"
    • View Profile
Re: my first successful model conversion!
« Reply #112 on: 2009-10-01 10:52:39 »
tol paki convert naman yung vincent jedi academy model sa battle at field..



cge na po!!!!

Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #113 on: 2009-10-02 03:07:07 »
Di ako marunong mag convert din pre... ang alam ko kelangan mong ayusin using KImera tsaka may iba pa. Blender ata yun tsaka....Aahh..si ko tkga ma gets din...   :oops: :?

halkun

  • Global moderator
  • *
  • Posts: 2097
  • NicoNico :)
    • View Profile
    • Q-Gears Homepage
Re: my first successful model conversion!
« Reply #114 on: 2009-10-02 04:20:19 »
As much as I appreciate an international community, you guys need to speak English please before I start translating your posts for you...

Just to let you know, I'm pretty bad at french :P

Evan Lee

  • *
  • Posts: 96
  • "I don't kill I eliminate"
    • View Profile
Re: my first successful model conversion!
« Reply #115 on: 2009-10-02 06:13:29 »
As much as I appreciate an international community, you guys need to speak English please before I start translating your posts for you...

Just to let you know, I'm pretty bad at french :P



sorry halkun ^^ i just got exited cos i didn't know that there were filipinos in this forum XD



So when you wash a cat in the toilet, do you use the soap, then the flea-dip? Or so you just go all out with the toothbrush   :oops: :?


From what I understand, you have to use dishsoap first, if you have a hamster
more power too you. I have a guinna pig myself and it makes a wonderful brush  ^^
you think so?

=== HALKUN EDIT ===
I told you I'll start translating comments myself to better make everyone else understand. I don't think I did that bad a job for a first time. Please use English in the forums so we all can particpate in the conversation.
« Last Edit: 2009-10-02 07:54:49 by halkun »

Harruzame

  • *
  • Posts: 473
  • Mondai Nai....
    • View Profile
Re: my first successful model conversion!
« Reply #116 on: 2009-10-02 09:04:02 »
So when you wash a cat in the toilet, do you use the soap, then the flea-dip? Or so you just go all out with the toothbrush   :oops: :?


I don't remember posting this stuff?   

So pls. don't put words on my mouth okay?...

It's distasteful...

drfeelgud88

  • *
  • Posts: 1355
  • da DOC iz here!
    • View Profile
    • My YouTube
Re: my first successful model conversion!
« Reply #117 on: 2009-10-02 17:26:50 »
That was a lil unorthodox Halkun, but you did warn them and yet they still continued...  :?

halkun

  • Global moderator
  • *
  • Posts: 2097
  • NicoNico :)
    • View Profile
    • Q-Gears Homepage
Re: my first successful model conversion!
« Reply #118 on: 2009-10-02 19:29:13 »
So when you wash a cat in the toilet, do you use the soap, then the flea-dip? Or so you just go all out with the toothbrush   :oops: :?


I don't remember posting this stuff?   

So pls. don't put words on my mouth okay?...

It's distasteful...

I speak a foreign language too. The problem is that when you speak in a language many can't understand, you offer nothing to the conversation. If you want to chat it up in unrelated, or via PMs, more power too you.  If you want to have a public conversation in the technical forums, we need to understand what you are talking about so we all benefit.

Evan Lee

  • *
  • Posts: 96
  • "I don't kill I eliminate"
    • View Profile
Re: my first successful model conversion!
« Reply #119 on: 2009-10-03 03:37:23 »
So when you wash a cat in the toilet, do you use the soap, then the flea-dip? Or so you just go all out with the toothbrush   :oops: :?


I don't remember posting this stuff?   

So pls. don't put words on my mouth okay?...

It's distasteful...



hey guys don't fight! :wink: hihi but... i don't really remember harruzame type those words....

well anyway i know this is odd topic but can you help me anyway mr.halkun?

i already posted my problem. if you can find a solution thanks!

I speak a foreign language too. The problem is that when you speak in a language many can't understand, you offer nothing to the conversation. If you want to chat it up in unrelated, or via PMs, more power too you.  If you want to have a public conversation in the technical forums, we need to understand what you are talking about so we all benefit.

death_gigas

  • *
  • Posts: 70
    • View Profile
Re: my first successful model conversion!
« Reply #120 on: 2009-11-03 12:14:36 »
pwede mu bah kong turuan nyan?....

drfeelgud88

  • *
  • Posts: 1355
  • da DOC iz here!
    • View Profile
    • My YouTube
Re: my first successful model conversion!
« Reply #121 on: 2009-11-03 22:49:37 »
Halkun. I was going to ask for this thread to be locked because it contributes to ripping models (well it did) and I just don't like seeing these kind of topics up on the first page...

Kudistos Megistos

  • Banned
  • *
  • Posts: 3929
    • View Profile
Re: my first successful model conversion!
« Reply #122 on: 2009-11-03 22:52:30 »
pwede mu bah kong turuan nyan?....

Ha ha ha, oh wow! :lol:

That's necromancy and posting in a foreign language, just two posts after a mod complained about people posting in foreign languages. He probably wrote something against the rules as well...