Author Topic: [FF7PC]FF7 SYW "ArkTsukiVock" (v4) upscale : Battle, world map, fields, videos (Read 210291 times)

Agravaile · « **Reply #275 on:** 2020-05-02 06:45:51 »

Which version of Reunion are you using? Does it happen without SYW pack? I believe you are using R06d, you have to upgrade to R06e, this was a known problem.

Sophitia · « **Reply #276 on:** 2020-05-03 14:50:09 »

Hello everyone, new member here. Please forgive my ignorance as I am new to the modding scene. I just finished the remake and am now attempting to get through the original but am having difficulty getting this mod to work. I just downloaded the game off Steam and got it running, but the mod doesn't appear to change anything so I think I'm not installing it correctly. I used the pack builder and put my primary ff7 folder as the target folder and waited for it to finish converting but to no avail. Are there additional steps needed?

nowy00 · « **Reply #277 on:** 2020-05-03 14:52:56 »

I have a problem in Mt.Nibel after bridge collapse, next background do not load correctly, part of screen is black and frame drop to 2-3fps. When i press ESC game crashes. I think this mod cause this problem, when i disable it is OK. I use 7th Heaven 2.0
PS.Sorry for my bad English

satsuki · « **Reply #278 on:** 2020-05-03 15:33:46 »

Are you using dds version, png version ?

nowy00 · « **Reply #279 on:** 2020-05-03 18:41:11 »

PNG version. Actually i extract iro and copy files to texture folder. I have already passed Mt.Nibbel ( without mod), i keep playing and it's ok at once. Maybe 7th Heaven cause this problem because that low fps is strange. A year ago I used your mod with old 7thHeaven and everything was fine.

satsuki · « **Reply #280 on:** 2020-05-03 19:03:37 »

if you have a crash with png, it's not png related, probably driver related.
use ffnx with dds version and should be ok

nowy00 · « **Reply #281 on:** 2020-05-04 11:10:19 »

I have this same problems with Jusete textures. This happen randomly. Any idea what cause this problem? I have only 1gb graphic card, and 4gb ram maybe this is problem.

OatBran · « **Reply #282 on:** 2020-05-04 11:24:09 »

Quote from: nowy00 on 2020-05-04 11:10:19

I have this same problems with Jusete textures. This happen randomly. Any idea what cause this problem? I have only 1gb graphic card, and 4gb ram maybe this is problem.

this isnt necessarily a problem with this particular pack in general, it happens because of limitations of the game engine and graphics driver. When it reaches max memory consumption and has no free space left there is no room for loading more textures, so black boxes are shown instead.

in aalis driver this is the point where the game would usually crash.

ffnx avoids the crash but produces these effects instead. try repeatedly transitioning the screen or opening the menu and closing it a few times and transition the screen to force the game to free some memory and reload everything.

Hopefully as the driver improves this will get less frequent or fixed altogether. The more hd mods you use the faster issues will occur, and some areas seem worse than others. just pay attention to the memory allocation, if you have those options enabled so you will know ahead of time before it happens (so you dont walk into a long story cutscene with everything garbled and no text to read)

satsuki · « **Reply #283 on:** 2020-05-04 12:47:49 »

Use ffnx with dds version and not png, png take about 50% to 70% more ram than dds
With dds you'll avoid alomost 100% of theses bugs

Agravaile · « **Reply #284 on:** 2020-05-04 13:21:13 »

Is there any issues with using this driver with Reunion? Honestly, these crashes are getting more often than not with mods installed, but i'm not sure if it will work correctly with Reunion if i switch to dds. Meawhile i'm stuck with PNG, but yeah, wish i could do something about those crashes, at least make them appear less.

Sophitia · « **Reply #285 on:** 2020-05-04 14:00:27 »

Can anyone help me with my issue...

satsuki · « **Reply #286 on:** 2020-05-04 14:54:49 »

you need to install a custom driver to allow mods, for exemple : https://github.com/julianxhokaxhiu/FFNx

nowy00 · « **Reply #287 on:** 2020-05-04 15:56:08 »

Satsuki, OatBran thank you for the advice. I try ffnx. Greetings

Sophitia · « **Reply #288 on:** 2020-05-04 20:22:38 »

Quote from: satsuki on 2020-05-04 14:54:49

you need to install a custom driver to allow mods, for exemple : https://github.com/julianxhokaxhiu/FFNx

Ok, I did that. Thank you for your response. Now though whenever I launch the game, regardless of resolution or full screen settings enabled, it loads in a small window that can't be enlarged or made full screen.

Any ideas?

LordUrQuan · « **Reply #289 on:** 2020-05-04 20:35:37 »

You need to edit FFNx.cfg to taste (7H only knows about the default driver right now)

kilyan · « **Reply #290 on:** 2020-05-04 21:06:47 »

In the FFNx.cfg file:

# Enable fullscreen mode.
# If off, it will run in window mode.
fullscreen = yes

# Resolution of the game.
# If any of the two is 0, the driver will use original game resolution ( 640x480 ) in window mode.
# Your desktop resolution in fullscreen mode otherwise.
window_size_x = 1920
window_size_y = 1080

set whatever resolution you need

Sophitia · « **Reply #291 on:** 2020-05-04 21:22:47 »

I edited it and saved. Still no change however.

OatBran · « **Reply #292 on:** 2020-05-04 21:54:06 »

Quote from: Sophitia on 2020-05-04 21:22:47

I edited it and saved. Still no change however.

Hash tags ( # symbols ) denote a comment line in the config file, you need to remove those from example lines so the value is actually read at run time

window_size = 2560 instead of #window_size = 2560

kilyan · « **Reply #293 on:** 2020-05-04 22:13:08 »

because you didn't notice i have not the #before the line, like oatbran said

Gracc · « **Reply #294 on:** 2020-05-05 12:31:50 »

Hi all, hoping someone can advise on how to get this mod working (assuming this is the place to ask)!

It's my first time modding FF7 but I've read through this topic and tried to make use of other people's suggestions, here's where I'm currently at:

1. Installed Steam version of FF7.
2. Installed Reunion 6e, that works fine.
3. Installed FFNx driver using instructions for the 2013 Steam release.
4. Downloaded SYW megapack file and full movies pack, then manually copied folders with .dds files into the Reunion CUSTOM folder.
5. Noted the 'satsuki' folder in Reunion options.ini.
6. Run the game from Steam.

The mod doesn't seem to load (I'm looking at the field background to check), but the full movies pack in the 'direct' folder loads the custom intro when I boot the game. Posting images in case someone can spot an error:

Any advice would be greatly appreciated.

satsuki · « **Reply #295 on:** 2020-05-05 13:24:46 »

Don't copie, use the provider converter, you need png to use with reunion

Kitokys · « **Reply #296 on:** 2020-05-05 14:53:46 »

Is the menu mod option not compatible with Reunion r06? After I install SYW (including menu mod) over my r06 install, it causes the button prompts to be empty.

satsuki · « **Reply #297 on:** 2020-05-05 15:03:54 »

Have you even read the "2)" of the "how to" ?

Kitokys · « **Reply #298 on:** 2020-05-05 15:08:06 »

Ah, in fact I didn't!

Though, in my defense, there is a quite a large amount of information being displayed in this window and I wasn't the only person to miss this. A disclaimer next to the option itself would have definitely caught my attention.

Thanks, and sorry for the dumb question.

Gracc · « **Reply #299 on:** 2020-05-05 15:35:44 »

Quote from: satsuki on 2020-05-05 13:24:46

Don't copie, use the provider converter, you need png to use with reunion

Thank you for the quick reply! Now I'm forced to expose my ignorance with a second question: how do I run SYWv4installer that contains the converter? It seems to be a '.pdb' file.
That's why I tried using the .dds files originally, heh.